Analog switches aktiv, passiv and , small signal relays with gold clad contacts

AS1
Analog switch activ

The active analog switches of the series AS1 are suitable for wear-free switching of analog or digital signals up to 15Vdc.

Datasheet

AS2
Analog switch passiv

The passive analog switches of the series AS2 are suitable for wear-free switching of analog or digital signals up to 175V ac / dc.

Datasheet

AS3
Analog Switch / Solid-State-Relay / Optocoupler

The devices of the analog switch series AS3 supply a no wear switch contact to the user, which is suitable for switching DC or AC signals in the range of 0…48VDC (30VAC) with a maximum load of 350mA . The drive shall be effected, depending on the device, with a direct voltage in the range of 5 to 60V DC. This can even been chosen, via soldering jumper, in the module by the user. It also can be ordered pre-configured by using our order code.

Datasheet

SR1
Gold clad relay 1 channel 2 changeovers contacts Control voltage 180...230ac / 24Vac

The gold clad relays of the series SR1 are suitable for switching voltages of 1 µV to 250V or currents from 10µA to 0,5A.

Datasheet

SR2
Gold clad relay 2 channel 1 changeover contact each Control voltage 180...230ac / 24Vac

The gold clad relays of the series SR2 are suitable for switching voltagesfrom 1µV to 250V or currents from 10µA to 0,5A.

Datasheet

SR3
Relay 1 Changeover Contact 24VDC/230VAC

The devices of the relay series SR3 provide the user with 1 changeover contact for disposal. They have been developed for switching DC- or AC voltages with currents up to 6A. The modules can be delivered with driving voltages of 5V, 12V or 24V. One LED in the front panel signals the switching status. The devices are mounted in a 6,2mm wide terminal case and are mountable space saving side by side on cap rail.

Datasheet